Ask question

06.03.2014   Elena
Elena asked:
Hello! Do you have any agents in St.Petersburg?
 
Editor answer:
Hello! On the page with contacts you will find the contacts of all our sales agents including from St.Petersburg: http://antonio-merloni.ru/affiliates
 
 
19.02.2014   Mars Kyarimovich
Mars Kyarimovich asked:
Hello! I constructed a house in Moscow region, Volokolamsky district, which consists of two parts. The first part consists of 6x6 (200-250) blockhouse.The second part – from 5x6 (150x150) wooden blocks.And also habitable attic.I want to install double circuit gas heater.1. Which gas tank of your company will be appropriate for me in terms of volume? 2. Which boiler would you recommend to connect?I’d like to know the total cost: gas tank installation, connection, feeding and connecting to gas equipment.The cost of your materials. If possible, the cost of your work separately.
 
Editor answer:
Hello! For your house we recommend you to install gas tank with capacity of 1650 or 2250L. You can calculate installation cost for independent gasification system by yourselves on the page of our internet-shop: http://antonio-merloni.ru/gazifikaciya-zagorodnogo-doma or http://antonio-merloni.ru/gazosnabzhenie-doma. To heat your house I would recommend you to use air system on gas convectors, it is significantly more comfortable and economic than traditional water system and doesn’t depend on electricity. You can find more information about it here: http://prosto-teplo.ru/videos
 
 
16.02.2014   Svetlana
Svetlana asked:
Hello! Please, advise if it’s possible to install your gas tank in a hothouse of 1000 square meters without vaporizer … (we are arguing with my husband) and which volume will be better to buy? THANK YOU!
 
Editor answer:
Hello! You will need a cistern with capacity of 5000L. Its efficiency will be sufficient to heat a hothouse without vaporizer use. Just please, pay your attention that gas tank should not be installed inside any room including hothouse. Gas tank is underground and its hatch should be in open air. You can find more information about cisterns of 5000L here: http://antonio-merloni.ru/antonio-merloni-italiya/557-gazgolder-podzemnyj-vertikalnyj-5000-litrov.html
 
 
17.12.2013   Andrey
Andrey asked:
Hello! What is a price for gas tank installation with 2250L capacity, LUX mount? The distance between gas tank and socket inlet is 18 meters, is it fine? What’s the difference between vertical gas tanks and horizontal?
 
Editor answer:
Hello! You can calculate the price for gas tank including delivery and installation by yourselves on the page with ready solutions: http://antonio-merloni.ru/gazosnabzhenie-doma. Just add required components to the basket and indicate the distances. For your convenience you will find currency switch in the right upper corner. You can also call to our office, here are the contacts: http://antonio-merloni.ru/stores. 18 meters distance is fine. As for the differences, we can speak a lot about them, read here the answers to frequently asked questions: http://antonio-merloni.ru/faq
 
 
25.11.2013   Vitaly
Vitaly asked:
Hello! What would be the price for complete set including installation and delivery to Khabarovsk Territory? Of course, in case if you had such orders. Is it also possible to install self-supporting with help of professional gas plumber? We don’t have your representatives in our region, but if we have please, advise the address. Thank you.
 
Editor answer:
Hello! We offer vertical cisterns with capacity from 1000 to 5000L. You can calculate the cost of the set with required volume to connect by yourselves on the page: http://antonio-merloni.ru under the button “Solutions”. Your local gas plumbers will be able to mount a system. We realize delivery all around Russia by transport companies, and each delivery is worked out separately. The cost depends on many factors and first of all on the capacity of a gas tank. If you have any difficulties with cost calculation you can address our office, our professionals will help you. Here are the contacts: http://antonio-merloni.ru/stores
 
 
18.11.2013   Valentina
Valentina asked:
What would be the price of specialist on-site visit to install gas tank with capacity of 1000-1650L on the lot located in Moscow area? What would be the cost of key-ready gas tank installation considering all services (transportation – 65 km from MKAD, ground works, installation, layout in the house and so on.)?
 
Editor answer:
Hello! On-site consultation on the object costs 50 Euro plus transportation charges to your place. To calculate the total cost of installation for independent gasification system we need to know the location of your house. You can make it by yourselves on the page: http://antonio-merloni.ru/gazifikaciya-zagorodnogo-doma. Or call our office and our professionals with help you. Contacts are here: http://antonio-merloni.ru/stores
 
 
17.11.2013   Stanislav
Stanislav asked:
It is required to install a gas tank for grain dryer. Gas flow rate is 66 cubical meters per hour; working period is July and August.
 
Editor answer:
For your needs we can offer you an ideal solution. Required efficiency without evaporator use can be provided by gas tank group 4x5000 or 5x5000. To make more precise calculation please, address our office: http://antonio-merloni.ru/stores
 
 
17.11.2013   Artem
Artem asked:
Hello!I would like to buy a device with 2250L capacity.I’m interested what warranty period of safety cistern exploitation is settled by the production plant and agreed in the bodies of Rostechnadzor. What is technical inspection periodicity of the equipment for the purpose to extend safe working period?
 
Editor answer:
Hello! Expected useful life of a vertical gas tank from Antonio Merloni is 50 years and more. These factors are reached thanks to several solutions such as 7mm wall thickness, triradial anode-cathode protection, corrosion resistant finish from worldwide renowned Carboline Company and finally Marsupio protective bag which secures gas tank under the ground. Gas tank does not require recertification in Rostechnadzor. The cistern is not a subject to be repaired and does not require to extend operating life.
 
 
14.11.2013   Eugeny
Eugeny asked:
Hello! I want to install a gas tank of your company in Volgograd; for a moment I have not succeed yet to lure your agents to my lot and watch the area; I hope I succeed to persuade them. In case I will not be able is it possible to order a gas tank with all materials directly from Moscow?
 
Editor answer:
Hello! Yes, of course, call our Moscow office and we will provide you with direct sale.
 
 
13.11.2013   Larisa Zhneykina
Larisa Zhneykina asked:
Good evening! Could you please advise the phone numbers and address of your official dealers?
 
Editor answer:
Hello! Sales agents in Russia and in member countries of Customs union are all here: http://antonio-merloni.ru/affiliates
 
 
05.11.2013   Valentina
Valentina asked:
Hello! We have a drain pit where the water after the rain raises for half a meter from the surface. Does it mean that a gas tank will be exposed to flooding? In this case is the installation possible? If so, how much does it increase explosive risk? Thank you for your reply.
 
Editor answer:
Hello! Gas tank does not afraid of being surrounded by ground waters. On the contrary, water heats a gas tank making gas steadily boiling. The main thing is that the water should not flow into plastic necktube but its lid is higher than the ground level. If the danger of lid flood exists it is necessary to install gas tank higher and then organize a banket.
 
 
04.11.2013   Angelica
Angelica asked:
Hello! I live in Samara. My house is in Samara region. Do you have your representative in our region?
 
Editor answer:
Hello! We have sales agents in Samara and neighboring regions. You can find their contacts on the contact page: http://antonio-merloni.ru/affiliates
 
 
30.10.2013   Vladimir
Vladimir asked:
Hello! I live and work in Khabarovsk (an engineer certified according to PB 12-609-03, i.e. LPG and not only it). I’m interested in independent heating system which operates on LPG.
 
Editor answer:
Hello! Please, advise what exactly you are interested in? On our website there is exhaustive information about this subject. We work all around Russia and we are interested to have representatives in all regions. You can contact by any means. The contacts are here: http://antonio-merloni.ru/stores. You can find working terms on our website: http://antonio-merloni.com
 
 
24.10.2013   Anatoly
Anatoly asked:
What would be your proposal for independent gas supply for the shopping center with the total area of 1250 m2 on 3 floors? Selection of gas tanks, price, availability dates and so on? An average gas flow rate per month, per heating season, per year?The price for gas, delivery terms to Ramenskoye, Moscow region?8-916-361-37-26
 
Editor answer:
Hello! To provide your object with independent gas supply we offer you to install three vertical gas tanks from Antonio Merloni. You can choose required equipment and services by yourselves on the website of our internet-shop page: http://antonio-merloni.ru/avtonomnoe-gazosnabzhenie-chastnogo-doma or you can call our office. Only the practice can show you a real gas flow rate. It heavily depends on the heat losses of the building. The price for gas verifies very much depending on the season what is 12 rubles per liter in average in the end of the winter and up to 18 rubles per liter in late autumn. Equipment is on the warehouse in Moscow. The mounting of independent gas supply system will take one day.
 
 
23.10.2013   Anton
Anton asked:
Hello! You did not answer the questions about the price for your specialist on-site visit to Nefteyugansk to estimate the final cost! At the same time please, advise … The point is that in the north the temperature in the winter very often drops lower than minus 40, how will your equipment operate in this case? Have you already installed it to anybody in Surgut, how did it operate during the winter?
 
Editor answer:
Hello! On-site consultation of the specialist from Moscow costs little bit more than 2000 rubles, plus transport charges and business trip expenses: airplane tickets, transfer to the airport, meals and so on. At the same time you can contact our professional in your region and discuss with him the terms and the cost of his visit to you. Contacts are here: http://antonio-merloni.ru/affiliates We have gas tanks from Antonio Merloni installed in Surgut. They operate well.
 
 
22.10.2013   Anton
Anton asked:
Hello, could you please advise what would be the cost to install your cheapest equipment with key-ready delivery to the house with area of 170 m2 which is situated in Nefteyugansk, Khanty-Mansi Autonomous Area, 40 km from Surgut. Just please, don’t send me calculating by myself on your page; in case if you cannot tell exactly please, advise an approximate price indicating the list of works, used materials and delivery! Also please, advise what would be the cost of your specialist on-site visit for the consultation in above mentioned city?
 
Editor answer:
Hello! For your house we can offer you to install gas tank with capacity of 1650 or 2250L. The cost of the equipment including mounting on your lot will be 5 278 Euro for the cistern with capacity of 1650L and 5 778 Euro for the cistern with capacity of 2250L. This is excluding ground works. Here you also should add the cost for delivery to your place. And visit of the installers. We have representatives in your region that will help you to find an ideal transportation ways and will organize delivery and mounting. You can find their contacts here: http://antonio-merloni.ru/affiliates
 
 
17.10.2013   Aleksey
Aleksey asked:
Good afternoon! Our company realizes mounting of gas supply systems; now we need to mount independent gas supply system. Which documents are required for facility commissioning? Which executive documentation and who should we put to the facility? Which approval documents will be asked from mounting organization and which documents (certificates) are required for the professionals who will realize mounting works to install independent gas supply system.
 
Editor answer:
Hello! Realizing mounting of independent gasification systems for private houses and placing them in operation, contrary to the gasification by natural gas, it is not necessary to get any authorizations and make up executive documentation. The object is put into service only for the client. Mounting organization might not have approval documents because the license for such kind of works is not required. The installers who realize mounting works should have certificate PB 12-609-03. Safety precautions during the works with liquefied petroleum gases.
 
 
17.10.2013   Yuliya Vasilyevna
Yuliya Vasilyevna asked:
Hello, could you please advise if you have branch offices which realize connection of natural gas in Arkhangelsk Region?
 
Editor answer:
Hello! We realize independent gasification which doesn’t depend on natural gas. If you will need to gasify your house independently please, address us. We have a representative in Arkhangelsk.
 
 
16.10.2013   Stepan
Stepan asked:
I want to install a system of independent gas supply for my house needs in the gardeners’ non-commercial partnership. The only one available place to install a cistern for gas is situated 1 meter from the fence, where the public traffic way behind used by GNCP. There are also 220V ETL, high voltage ETL (almost above the fence) and medium pressure gas pipeline which is 4-5 meters from supposed place where the gas tank is going to be installed. Here are the questions: is it possible to install gas tank in this case and which documents are required to be presented to the administration of the GNCP to allow an gas tank installation one meter from my fence on my lot?
 
Editor answer:
Hello! Your relationships with GNCP administration are regulated by internal regulations. According to fire security norms there are no any infraction. As for the distance from the ETL and from the gas pipeline of medium pressure I recommend you to call our office and order on-site consultation: http://antonio-merloni.ru/stores Our manager will determine on place the best area to install a cistern.
 
 
30.09.2013   Dmitry
Dmitry asked:
Hello!140 m2 house, brick, twenty-four-hour accommodation. There is required a heating, hot water supply, cooking on gas. Required equipment? Price for mounting? Price for charging and maintenances per year?Thank you.
 
Editor answer:
Hello! The cost of gasification is calculated considering the price of the equipment, delivery to your place and mounting. You can calculate all these points by yourselves on the page of our internet-shop: http://antonio-merloni.ru/gazosnabzhenie-doma. Calculating charging cost take note that the price for gas depends very much from the season (the most expensive – the end of autumn – winter). Today the liter in Moscow region costs about 16 rubles. In summer it goes down till 12-13. Gas flow rate depends on many factors where the most important is heat-insulation of the house. No less important is a type of the heating system. The most cost-effective solution will be an installation of air heating system. Read more here: http://prosto-teplo.ru/
 
 
11.09.2013   Ludmila
Ludmila asked:
Hello! What about your representatives in Ukraine?
 
Editor answer:
Hello! For a moment we don’t have representatives in Ukraine.
 
 
10.09.2013   Varkov Andrey
Varkov Andrey asked:
Good afternoon! I wonder concerning the following question. Is it possible to install a gas tank on the territory flooded during spring period? If so, what are the requirements for such kind of installation?
 
Editor answer:
Hello! In your case it is reasonable to make small hill to place gas tank lid higher than the water level. Watch the photos of our mountings, there you’ll find detailed examples: http://antonio-merloni.ru/photo
 
 
14.08.2013   Aleksey
Aleksey asked:
Hello! What’s the difference, except the price, between “standard” mount of gas tank and “Lux” mount?
 
Editor answer:
Hello! LUX mount differs from ECO mount only by gas socket inlet. LUX inlet consists of low part equipped with Italian frost-resistant cock and temporary cover for pressure check and air bleeding from the pipeline; and upper L-shaped part which directly enters the house. Making LUX mount, we drill a hole in the house and the pipe enters the building. ECO inlet is a pipe taped up by corrosion resistant bitum tape; it has thread in the end. More often we use ECO mount to connect outdoor gas tanks.
 
 
07.08.2013   Valentina
Valentina asked:
Hello! I have the following questions: we have a cottage with usable area of 125m, which gas tank would you recommend? Does it make any sense to gasify independently if the house is used and heated only in April, May and September? In winter we spend in the house 2 weeks in total … we would like to cook on gas, of course, and constantly from May to October…Thank you for your comments.Valentina
 
Editor answer:
Hello! For your house it will be appropriate to use a gas tank with capacity of 1650L. http://antonio-merloni.ru/antonio-merloni-italiya/1281-gazgolder-podzemnyj-vertikalnyj-1650-litrov.html . Installed Antonio Merloni gas tank you will be able to cook, to use hot water supply, you will get the possibility to install efficient and environmentally friendly gas generator for case of electricity shut down. And this is saying nothing about convenient heating. To do without boiler, boiling room, antifreeze in the system and without dependence of the heating from electricity I recommend you to install air heating on gas convectors. You can find more details here: http://prosto-teplo.ru Convectors will warm up your house fast (15-20 minutes) till comfort temperatures consuming significantly less gas than traditional water boiler.
 
 
07.08.2013   Dmitry
Dmitry asked:
Good afternoon! I would like to ask a question about gas tank remoteness from the living house. The point is that on your website it is indicated that minimum distance should be 5 meters. However, SniP 42-01-2002 speaks about 10 meters. Could you please explain more detailed? It’s very important for me. And one more questions. Where is it possible to find certificates for your products? Thank you.
 
Editor answer:
Hello! Please, pay attention to the text above the table with distances where it’s indicated the following: Reconstructing existing objects, and also in tight space (for new projecting) it is allowed to reduce the distance indicated in the table 7 up to 50%. Certificates for gas tanks are sent to your e-mail.
 
 
06.08.2013   Elena
Elena asked:
Is it allowed to install gas tanks in gardeners’ non-commercial partnerships and which approval documents are required for it? Is it possible to install a gas tank 3 meters from the corner of the house because there is no any possibility to install it another place?
 
Editor answer:
Hello! The most of all gas tanks we install exactly in GNCP. You don’t need to have any approval documents. It’s also no need to agree it with anybody. It is prohibited to install a gas tank 3 meters from the house; it’s prohibited according to secure rules. But alternative solutions almost always exist. Connect us and we’ll try to help you. http://antonio-merloni.ru/stores
 
 
05.08.2013   Dmitry
Dmitry asked:
Good afternoon! I will bring up once again a question about normalized gas tank remoteness from the living house. You have already replied that minimum – 5 meters. In which normative document is it possible to see that? Which documents in general prescribe gas tank installation for private house?Thank you.
 
Editor answer:
Hello! The main documents which prescribe the installation of a gas tank are SniP 42-01-2002 and PB 12-609-03. The distances are regulated on SniP.
 
 
26.07.2013   Roman Pavlovich
Roman Pavlovich asked:
Good afternoon!The house is made of laminated log with the total area of 280 m2 in Krasnoyarsk Krai, All the year around accommodation. There is required heating supply, hot water supply and cooking on gas.Here several questions:1. Representative in Krasnoyarsk Krai2. Which equipment in required (one boiler or two, how the water will be heated up);3. Installation period and price for “key ready” installation.4. Discounts in case of 100% prepayment.
 
Editor answer:
Hello!The representative in Krasnoyarsk Krai is finishing now the registration; for a moment your neighbor sales agent is in Kemerovo and Novokuznetsk. You can find their contacts on our website on the page “Contacts – Our representatives”:http://antonio-merloni.ru/affiliates For your house it is required a gas tank with capacity of 5000L but it’s better to make a system of dual configuration with 4500L. On this page you will calculate by yourselves a price for a system, mount and equipment delivery to your place: http://antonio-merloni.ru/avtonomnaya-gazifikaciya-doma ; and gas boiler with capacity about 30kW.To heat water in HWS system you can install direct-flow or storage gas water heater. The dates depend on the efficiency of a transport company because all equipment is available in stock in Moscow.5% discount is provided for the purchase of the “dual configuration” system.
 
 
17.07.2013   Sergey
Sergey asked:
Hello! Please, advise if you have comparative and estimate price calculations for gasification systems to apply for heating and hot water supply on base of liquefied gas (considering charging expenses) and natural gas per cubical meter of heated area and hot water consumption points. Probably you have comparative calculations of demand costs for mount and construction of your system and system of the main pipeline gas for kW or Gcal of settable capacity. Of course, it’s understood that a system with gas tanks is usually applied in conditions when the object is remote from the gas pipelines but can it be an alternative to the main pipeline gas if the gas pipeline is nearby? What are the main advantages? – security, minimum maintenance, launch dates, different agreements and so on.
 
Editor answer:
Hello! For the moment exploitation cost of heating system on natural gas (the main pipeline) is the cheapest one comparing with all the systems. But there are some moments which speck for the independent system on liquefied gas. The fist is difficult to connect. Very often it happens that “gas is along the border of the lot” but it’s not possible to connect it because the flow efficiency of the pipe is limited. Or connecting cost is very high. In Moscow region it is not uncommon when more than one million rubles is asked for the connection. And of course, it’s a time factor. All these approvals, gas pipelines construction very often might take years. I offer you to watch the article concerning this subject: http://antonio-merloni.ru/nedostatki-magistralnogo-gazosnabzhenija We offer you to gasify your house for one day! No any approvals! At the same time you should not forget that natural gas will increase in price for sure, particularly because our country entered WTO. As for liquefied gas, its price is connected to the price of gasoline and already reached its maximum.
 
 
05.07.2013   Ekaterina
Ekaterina asked:
Good afternoon! Do you have a representative in Krasnodar?
 
Editor answer:
Hello!In Krasnodar we have a sales agent Maltsev Eugeny Valeryevich. His phone number is 8-928-428-84-21. If you have any problems, you can always call to the office in Moscow and we will organize a consultation and direct purchase.
 
 
01.07.2013   Victor
Victor asked:
Do you have a representative in Samara? House of 590 m2. Which equipment will be appropriate for me, how much will it cost?
 
Editor answer:
Hello! We have representatives in Samara. You can find their contacts on page “Contacts” “Our representatives” http://antonio-merloni.ru/affiliates. An ideal variant for your house will a solution of “dual configuration 7250” http://antonio-merloni.ru/gazifikaciya-kottedzha On this page you will be able to calculate by yourselves how much it will cost. If you have any questions we’ll be always glad to answer them. Our contacts are here: http://antonio-merloni.ru/stores
 
 
04.06.2013   Kirill
Kirill asked:
Which category should I consider for Merloni gas tanks (vertical 5 m3) in approval documents (certificates and so on) – double walled or single walled? I’m interested in double walled variant as a base for distance reducing.Anode-cathode protection – active or passive?Application – cottage. I’m not going to check it now but later it might happen.
 
Editor answer:
Hello!It is not indicated in the certificates if the cistern double or single walled. The thickness of the wall is 10mm. Inside there is polymer coating. Electrochemical protection is passive.
 
 
28.05.2013   Dmitry
Dmitry asked:
Hello! The house is in Surgut, 2 floors, wood-framed, thermal insulation made of basalt slabs, siding outside. Which gas tank volume will be enough and the possibility of purchase, delivery and mount by the professionals from your company. What would be the price?
 
Editor answer:
Hello! You didn’t write the most important thing: what is heated area? You can choose required volume by yourselves on our website, on the main page there is a button “Ready solutions” http://antonio-merloni.ru Delivery and mount are also possible. Write us and we will calculate the price. E-mail contacts are on the page “Contacts”: http://antonio-merloni.ru/stores
 
 
28.05.2013   Nikolay
Nikolay asked:
And there is the main question: what would be the cost of ground works? Heating, HWS, stove, convectors – 8 pieces and water layout all along the house???
 
Editor answer:
You can calculate the cost of independent gasification by yourselves on the page of our internet-shop: http://antonio-merloni.ru/gazosnabzhenie-doma Or you can call dialing any phone number mentioned on the contact page: http://antonio-merloni.ru/stores To calculate the cost of the heating system arrangement and water piping lay-out we need more information. See price level for the equipment here: http://prosto-teplo.ru/71-konvektor-chugunnyj If your house will be well heat insulated and there will be arranged air heating on gas convectors an average annual gas flow rate for heating will be about 15 liters per 1 m2 per year.
 
 
28.05.2013   Nikolay
Nikolay asked:
House made of sip panels + siding, 120 m2. Which gas tank is required for heating, HWS and gas stove? All the year accommodation. There are required “key-ready” works including inside lay-out and 8 pieces of air gas convectors. Do you realize water pipe lay-out in the house?
 
Editor answer:
Hello! You can apply for your house a gas tank of 1650L or 2250L. http://antonio-merloni.ru/antonio-merloni-italiya/1283-gazgolder-podzemnyj-vertikalnyj-2250-litrov.html We will realize at your earliest convenience all the works for gasification and air heating arrangement in your house. Water pipe lay-out in also within our competence.
 
 
20.05.2013   Konstantin
Konstantin asked:
Which volume can be chosen if the house area is 350 sq.m. and heat losses are 50W per 1 sq.m.?
 
Editor answer:
Hello. If your house is really so well heat insulated and its heat losses during strong frosts are only 500W/m2, it’s better to choose a gas tank with capacity of 5000L. Only practice can show you charging frequency. As a rule, in this case it will be one-two times per year.
 
 
17.05.2013   Aleksey
Aleksey asked:
Hello!1.Please, advise gas tank capacity required to heat 2-floors house with second light, area 125 m2, framehouse with 30 cm heat insulation by basalt plate Rockwool + OSB plate + beams imitation from both sides. It is supposed to install 24 kW BAXI boiler.2.How much gas will it be used in winter? Area – Moscow region. 3.Are ground works included in the mount cost which is indicated on the website?
 
Editor answer:
Hello! For your house it’s required and sufficient vertical gas tank with capacity of 2250 liters. I recommend you to choose the capacity of the boiler more carefully. You are going to install a boiler which is almost two times more powerful than you need, what will inevitably cause excessive gas flow rate and will reduce service time of the boiler. Gas flow rate is individual for each house and depends on how fundamentally your house is heat insulated, on the habits of the owners, on the type and the arrange quality of heating system and even on the type of the heat carrier (distilled water or antifreeze). In average, according to the experience, I can tell that you will charge two times per year in case of liquid heating and one time in case of air. You can find more details on our website: http://prosto-teplo.ru Ground works are not included in the cost indicated on the website and are realized by the client individually, or by our company according to additional agreement.
 
 
26.04.2013   Sergey
Sergey asked:
Do you have a representative in Perm Kray, Perm.
 
Editor answer:
Hello. We have several representatives in Perm Kray. You can find their contacts here: http://antonio-merloni.ru/affiliates
 
 
19.04.2013   Sergey
Sergey asked:
I addressed to your company with the request about “key-ready” gasification and mounting of heating system from gas boiler for a countryside house, I asked for the calculations. Finally I received the calculation only for the delivery and installation of gas equipment; the cost for mounting works and start-up and adjustments works supposed to be given me only after I would sign a contract for gas tank purchase. The question was – “if I will not be satisfied by the cost for the heating of the house, why should I buy a gas tank in your company and then additionally find contractors?” The answer was – “This is a policy of our company”. On my opinion such policy is not only logical but also vicious. First of all it does not give the possibility to make a choice among the proposals from other companies (indeed, you don’t give the final price), the second, it might be considered as a solicitation (indeed, after the product is bought it will be necessary to make effort and spend the time to find a contractor or to agree to your, probably surcharged, price). In you count on it, it’s really bad business.
 
Editor answer:
Hello! As I have already told you many times, we are ready to realize heating project for you. Project planning, calculations, selection of materials will take two-three days. We need to hear your desires, which materials will we use, equipment from which companies to install. One thing if you wish to use inexpensive, but also nondurable polypropylene pipes using a boiler, radiators and other equipment from medium segment; but it will be another story if you wish to use pipes made of cross-linked polyethylene with compression fittings and other equipment from well known companies. The prices will differ very much. I gave you an average supposed price. Please, also don’t forget that the main specialization of our company is anyway independent gasification. There is no independent gasification without gas so, the gasification first. Today it will be no trouble to find contractors to realize works for heating. If you will not be satisfied for some reasons by the variant proposed by our company you can always address to another company.
 
 
12.04.2013   Andrey
Andrey asked:
Hello! I have your 2250L gas tank, how to understand how many liters it’s necessary to charge if the level detector shows 15%. Thank you.
 
Editor answer:
Hello! Since the useful capacity of the gas tanks is 85% from geometrical, in case of 15% rest it’s necessary to charge 70% what will be 1575 liters.
 
 
02.04.2013   Andrey
Andrey asked:
Do the gas tanks of external installation exist? What’s required for that? There is required gasification for 5-9 houses. You can send all information to my e-mail.
 
Editor answer:
Hello! Antonio Merloni Company produces ground based and underground gas tanks. On our warehouse in Moscow there are only underground cisterns. Realizing gasification by ground based cisterns the requirements for installation are much higher while underground cisterns are safer. And don’t forget that ground based gas tank required evaporator, in bad case it will not operate in winter. Using of evaporator (usually its cost is higher than the cost of gas tank itself but the service time is two-three times less) will cause additional gas flow rate or electricity consumption. Contact our office and we will find ideal solution for your needs: http://antonio-merloni.ru/stores
 
 
24.03.2013   Maxim
Maxim asked:
Goo afternoon! I am an owner of small construction company, the interest to your know-how appeared when the client asked about advantageous fuel for his future home residence where he is going to live all around the year. So, the question is if you have representatives in Chelyabinsk or in Ural region?
 
Editor answer:
Hello! We have several representatives in Chelyabinsk and in Ural region. I recommend to address to Sigatov Eduard Aleksandrovich (8-908-067-03-39) from Chelyabinsk or to Ustenko Sergey Mikhaiyovich (8-351-901-31-80) from Magnitogorsk.
 
 
20.03.2013   Sergey
Sergey asked:
Hello! Do you have your representatives in St.Petersburg who can install gas tanks with capacity of 5000L? Thank you.
 
Editor answer:
Hello. I recommend you to address to Rumyantsev Vasily, call him 8-812-969-86-09 or 8-921-969-86-09. He will help you.
 
 
16.03.2013   Sergey
Sergey asked:
Good afternoon. I would like to install your gas tank in my 300 sq.m. house. How to calculate the total amount (“key-ready” solution)?
 
Editor answer:
Hello! The easiest way is to use our internet-shop. Follow the link: http://antonio-merloni.ru/solution4, add required components to the basket and you will get the final cost. Also you can always precise details which are not clear contacting us by any way. Our contacts are here: http://antonio-merloni.ru/stores
 
 
09.03.2013   Natasha
Natasha asked:
Hello! Could you please advise? I have 2250L gas tank installed. House. Andy beams, 180m2, minimum heat losses. Under floor heating on the first floor, radiators on the second, boiler. But we live there only beginning from Friday evening till Sunday; the temperature in the house is 22 degrees. During week days there is maintained temperature of 14 degrees. Boiler starting-up and adjustment is already done, gas pipeline is laid, no any claims. But we worry about big gas flow rate. During the week we spend 10% of gas what is 225 liters. Also checking the rates of gas tank detector (when the lid is opened) there is strong gas smell. There are two questions: 1. Why there is such gas flow rate? 2. How to check (besides soap solution) shut-off valves for the purpose of gas leaking? I’ll be waiting for your reply. Thank you.
 
Editor answer:
Hello! According to our information you have installed a boiler with capacity of 40 kW which can heat a house with the area of 400m2 what exceeds heating needs of your house in more than 2 times. Now some figures: we divide 40kW (capacity of your boiler) by 13,2 kW (liquefied gas calorific equivalent) and we get the floe rate of your boiler what is 3,03 kg/h. We multiply by 24 hours and we get 72,72 kg per 24 hours what will be 509,09 kg per week. We divide this amount by gas density – 0,54 kg/l. So, we get 933 liters. This is the quantity of gas which should burn in your boiler for seven days considering maximum load. Since traditional boiler of water heating cannot use less than 50% of its capacity (see “reason 2”: http://prosto-teplo.ru/cravnitelnyj-analiz-vozdushnogo-i-vodjanogo-otoplenija) we divide this figure by 2. We get 466,5 liters at 50% load; this is the quantity of gas which can burn in your system. At the same time, you use under floor heating what is an element of comfort, irrational heat use which heats among other things elements in the house which don’t require it. Also the role is played by antifreeze which used in your heating system; thanks to its physic-chemical characteristics (it has tremelloid body) it is worse heat carrier than distilled water. No less important fact is that reducing the temperature of heat carrier to adjust the temperature in the house, you reduce performance factor of the boiler because the less the difference between heat carrier temperature and the temperature in the room the less the heating efficiency. Basically, considering constructed and realized quite inefficient liquid heating system which is not expensive in mounting but causes maximum fuel consumption rate, above mentioned gas flow rate if absolutely adequate. If you realized air heating system gas flow rate would be three times less. You can find more details here: http://prosto-teplo.ru/cravnitelnyj-analiz-vozdushnogo-i-vodjanogo-otoplenija As for the gas smell under the lid of the gas tank here we can say the following: if you would lose at least one liter of gas per week, not only you but also your neighbors could have already felt it. The smell that you feel is the residual odor of ethyl mercaptan which is used as odorant for domestic gas which naturally does not have smell. Hermeticity test is realized by hydrotest under high pressure with help of digital pressure gage during 24 hours.
 
 
07.03.2013   Aleksander Bryansk
Aleksander Bryansk asked:
Hello! We addressed you in Moscow by phone many times, we spoke but later there were not any actions. If it would be possible to install gas tanks in Bryansk, many people would do that but alas???????????
 
Editor answer:
Hello. You addressed our representative in Bryansk. Unfortunately he couldn’t help you. But as I have already replied you below you can always address directly to our office. Here are our contacts: http://antonio-merloni.ru/stores Contact any of our managers by phone or by skype and we will certainly help you.
 
 
06.03.2013   Aleksander Bryansk
Aleksander Bryansk asked:
We addressed a dealer in Bryansk about gas tank installation; he gave a buildup but we want to install. Who we can address to or your just speak nice but a fat lot of use.
 
Editor answer:
Hello. I recommend you to address directly to our Moscow office and we will organize for you direct purchase and installation by the efforts of our professionals. You’ll find our contacts following this link: http://antonio-merloni.ru/stores
 
 
01.03.2013   Aleksander
Aleksander asked:
Good afternoon. House 9x12m, laminated log 18x20. Two floors, mansard.Please, advise:1.Optimal equipment composition2.The cost of equipment and works.3.Real consumption rate. Standard heating – radiators, under floor heating, hot water.
 
Editor answer:
Hello. For your area it will be reasonable to install a gas tank of 2250 liters.You can choose all necessary components for the systems and calculate the cost by yourselves on the page of our internet-shop: http://antonio-merloni.ru/solution3Add the components to the basket pushing button “+” and you will get the final price in the end. At the same time you can get the price calling our office. A real gas flow rate is individual for each house. Approximately, according to our experience you will need to charge two times per year.
 
 
28.02.2013   andrey
andrey asked:
I have slag-concrete house. The total area 100 sq.m. + sauna 20 sq.m. + gas stove. Gas flow rate in February 750 cubes. The temperature in the house is 23 degrees. MIMAX 16 boiler. The temperature on the boiler is 60 degrees + pump constantly in medium position. Please, advise if such gas flow rate is normal for winter month?
 
Editor answer:
Hello. According to the figures you have quite big heat looses and low efficient heating system. I recommend you to insulate your house and think to install another more progressive heating system, a system on gas convectors. More details are here: http://prosto-teplo.ru
 
 
27.02.2013   Maxim
Maxim asked:
Is there any representative in Krasnodar? If so, what are the phone number and the name of representative? Thank you.
 
Editor answer:
Hello. Here is the phone number of our sale agent in Krasnodar: 8-928-428-84-21 Maltsev Eugeny Valeryevich
 
 

Ask your question



Cart  

No products

Total 0,00 €

Check out

Site Search

© 1998-2024 GC "Terrikom". All rights reserved.

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Crediting
 X
Закажите обратный звонок

Наш сотрудник позвонит и ответит на ваши вопросы. Это быстро и бесплатно!

Заказать звонок